Wednesday, November 27, 2013

Upgrade Your Laptop with the Following DIY Steps for Installing a Sony or HP Computer Memory - Computers - Software

It can be a nervous and much feared task to open up your laptop or computer for any reason, whether it is your slow running fan, or a problematic gadget or two. Typically after two to three years, laptops are known to degenerate in a way or another. If you have kept it in good shape, however, you may notice that the computer's operating speed cannot keep up with the advancements of software and applications. It is an important and painstaking decision to purchase a new, faster computer when your old one is, in fact, just fine. For example, your old Sony computer memory or HP computer memory may only have 512 MB of RAM (Random-access Memory). To run the new Windows 7 operating system, the required memory size is 1 GB of RAM for 32-bit, and 2GB of Ram for 64-bit. And this is only the 'required' memory. You need much more RAM to smoothly run other applications and the operating system at the same time. As a solution, rather than purchasing a brand new computer, it is best to install additional RAM to your computer that is compatible with your computer, such as the Sony computer memory or HP computer memory for Sony laptops and HP laptops respectively.First, it is very important to review the type of motherboard, operating system, and processor before you purchase the right memory for your computer. The RAMs are only compatible with the same branded laptops, as mentioned above about the HP computer memory and Sony computer memory. After purchasing the right RAM, take a deep breath (nothing to worry about!), and make sure that all power supply to your laptop is totally disconnected before you unscrew to open up the framework. This will let you see the available memory slots of the motherboard to attach your new HP computer memory, Sony computer memory, or any other brand product. The memory slots will have white tabs to hold the RAM in place. Now hold the new memory module and insert it into the tab at a slant, carefully not to touch the bottom pa rt of the RAM. After making sure everything is set in place, and all cables are as is, close up the chassis and reboot your computer. If you hear two beeps when the operating system launches, there is a problem with the new RAM module, and you will need to check if it is firmly in place, or find out for other technical issues with the vendor. Sometimes older computers simply need a BIOS system update to recognize the module. If you face no problems, go on to your operating system to check that the computer is responding and recognizing the new HP computer memory or Sony computer memory. The new amount of RAM will be displayed, which will be the additional RAM that you installed on your original RAM amount.Purchasing an additional RAM is an excellent and cost-effective way to keep your computer up to date, and run intensive applications and software, without substituting the whole device with a new laptop. As described above, it is not at all complicated or difficult to insta ll an additional computer memory on to your computer. If anything does occur, most vendors will provide technical service and help to make sure you get the desired upgrade.





No comments:

Post a Comment